Produse pentru pentru inele (221)

Spannring 99mm - Spannringe Artikelnummer:038511099000

Spannring 163mm - Spannringe Artikelnummer:038511163000

Die PERFECT Kabelverschraubung aus bleifreiem Messing ist die passende Lösung zur Kabeldurchführung in verschiedensten industriellen Anwendungen. Eigenschaften: — RoHS konform — integrierte Zugentlastung für Kabel und Leitungen — Verdrehschutz — großer Dicht- und Klemmbereich — für Leitungen von 3 bis 48 mm — montagefreundlich — Temperaturbereich-20 °C / +100 °C (dynamisch) -40 °C (statisch, kurzzeitig) — Schutzart IP68 - 5 bar / IP69K — Prüfzertifikate VDE / UL / DNV in Bearbeitung — viele Varianten und Zubehörteile verfügbar Material:Messing bleifrei Schutzart:IP68 - 5 bar, IP69K Für Kabeldurchmesser:3-48 mm

Spannring 242mm - Spannringe Artikelnummer:038511242000

High pressures at relatively low speed. For fluids over a wide viscosity range and for gases. Rotary unions at high pressure. Robot axes

Motor shafts. Gear and frive unit shafts. Fan shafts. Clamping tools. Applications at high speed and lo pressure.

The main applications are liquids at very high pressure. This seal can also be used for gases if the maximum operating parameters are restricted.

The MANOY® U‑Cup is a pressureactivated sealing system. This means that the total sealing force is only ever as high as required to seal the prevailing pressure. This friction optimization saves energy. The MANOY® U‑Cup seals gases and liquids and also highviscosity fluids and pastes in a nonstandard version

The MANOY® U‑Cup is a pressureactivated sealing system. This means that the total sealing force is only ever as high as required to seal the prevailing pressure. This friction optimization saves energy.The MANOY® U‑Cup seals gases and liquids and also highviscosity fluids and pastes in a nonstandard version

The main applications are liquids at very high pressure. This seal can also be used for gases if the maximum operating parameters are restricted.

Hydraulic and pneumatic cylinders, Presses, Shock absorbers, Fittings, Controls, Piston and plunger pumps, Mobile hydraulics, Injection units

Hydraulic and pneumatic cylinders, Presses, Shock absorbers, Fittings, Controls, Piston and plunger pumps, Mobile hydraulics, Injection units

Face seal used for rotary and oscillating motion in pipe joints and rotary actuators. Used at low to high pressure and low speed

These sliding rings are the solution for designs which only allow room for a small or low housing. They are ideal for retrofitting into existing O‑ring grooves

With internally protected sealing lip. With O‑ring for sealing in the groove base. For high peripheral speed and increased chemical resistance

Suitable for nearly all fluids, Dry running possible, Low coefficient of friction, Very long life due to high abrasion resistance, No stickslip at low speed, Does not stick to the mating surface after prolonged shutdown, Nonsensitive to pressure peaks, Available in any diameter up to 700 mm

Werkstoff: Messing

Types 231 to 238 are used for lubricating fluids and to a limited degree also for dry running and purely rotary or oscillating motion. They are only partly suitable for helical motion.

Suitable for nearly all fluids, Dry running possible, Low coefficient of friction, Very long life due to high abrasion resistance, No chatter (stickslip) at low speed, Does not stick to the mating surface after prolonged shutdown, Nonsensitive to pressure peaks, Available for any diameter up to 700 mm

Sealing and bearing of rods, shafts, axes and spindles. Linear, oscillating and helical motion. Liquids, pastes and gases.

Werkstoff: Aluminium

Werkstoff: Stahl Zink-Nickel-Beschichtung schwarz

Größe 18L

High termat or chemical specifications. Medium pressure and low speed. Suitable for almost all fluids. Robat axes, Rotary unions.

Spherical valves are installed upstream of the turbine as shutoff devices specifically for high pressures at the end of the penstock. Their main function is to close off the penstock during normal shutdown or load shedding of the turbine. The seal is a metal sliding ring which is generally moved by water hydraulics. The MANOY® system seal WP, type 434 (outer sealing) and the inner sealing type 439, were developed for sealing of the sliding ring. The profile dimensions can be customized for maintenance or specific requirements.

Trenntransformator nach EN61558-2-6. Schutzart IP00. Leistungsangabe entsprechend T40/E. Mittellochverguss, zur einfachen Befestigung mittels einer zentralen Schraube. - Verlustarmer Ringkerntransformator - Transformator in offener Bauweise mit Deckbandage aus Isolierfolie - An der Unterseite ist eine Gummischeibe fest angebracht. Daher ist KEIN weiteres Montagezubehör notwendig. - Anschluss Eingang: massiver Kupferdraht in braunem Glasgewebeisolierschlauch, ~20cm lang - Anschluss Ausgang: massiver Kupferdraht, im Glasgewebeisolierschlauch, ~20cm lang Eingangsspannung: 230V~ Ausgangsleistung: 2x 110VA Gewicht: 2,3kg Nennfrequenz: 50-60Hz Ausgangsspannung: 2x 18V~ Ausgangsstrom: 2x 6,11A

The tandem configuration of type 116 allows static pressure maintenance in the critical unpressurized range and at low pressure. The security of this function is guaranteed by use of the IDG materials U95, U96 or U99 on the low pressure or atmospheric side.

The tandem configuration of type 114 allows static pressure maintenance in the critical unpressurized range and at low pressure. The security of this function is guaranteed by use of the IDG materials U95, U96 or U99 on the low pressure or atmospheric side.

Größe 28L

The MANOY® backup ring is a solid or split ring which is rectangular or profiled in section. Various sectional profiles and sizes are available in standard or customized versions. MANOY® backup rings can also be used in dynamic applications – positioned on both sides of the O‑ring for alternating pressure.